The bridge has a total length of 180 ft (55 m) and contains one 120 ft (37 m) reinforced concrete tied arch, identical in design to Ten Mile Creek Bridge and Wilson River Bridge. The locations for all three bridges were similar in that the sandy foundations were not secure enough for the abutment piers required to relieve the lateral pressure of traditional arches. The flood levels of the rivers approached the road grade and ruled out the use of reinforced concrete girders. The corrosive salt air eliminated the practicality of steel truss bridges. The design of the bridge was similar to the rainbow arch design patented by James Barney Marsh.
The bridge, along with the Ten Mile Creek Bridge and the Wilson River Bridge, was rehabilitated in 1996 to increase the overhead clearance and add a cathodic protection system to protect the embedded steel reinforcement against the corrosive air. A project to replace the cathodic protection system began in February 2014.[2]
Hadlow, Robert W. (2001). Elegant Arches, Soaring Spans: C. B. McCulough, Oregon's Master Bridge Builder. Oregon State University Press. ISBN0-87071-534-8.