Erma ESP 85A

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages) This article possibly contains original research. Please improve it by verifying the claims made and adding inline citations. Statements consisting only of original research should be removed. (September 2014) (Learn how and when to remove this message) The topic of this article may not meet Wikipedia's notability guidelines for products and services. Please help to demonstrate the notability of the topic by citing reliable secondary sources that are independent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be shown, the article is likely to be merged, redirected, or deleted. Find sources: "Erma ESP 85A" – news · newspapers · books · scholar · JSTOR (June 2023) (Learn how and when to remove this message) (Learn how and when to remove this message)

Erma ESP 85A
Type	Semi-automatic pistol
Place of origin	Germany
Production history
Designer	Stuart N. Lake
Manufacturer	Erma
Produced	1988–1994 [1]
Specifications
Mass	40 ounces (1,100 g)[1]
Length	10 inches (25 cm)[1]
Barrel length	6 inches (15 cm)[1]
Cartridge	.22 LR, .32 S&W Long[1]
Feed system	8-round magazine (.22 LR) 5-round magazine (.32 S&W Long)[1]
Sights	Interchangeable blade front sight, micrometer fully adjustable read.[1]

The ESP 85A is a target pistol produced by the German firearms company Erma.

Mainly used as a sporting arm, it is also found in service with security companies. It is available in two calibers, .22 LR (the preferred sporting or target model) and .32 S&W Long (7.65x23mm).

There is a difference between models marked ESP85 and ESP85A. Both versions could have been had with either the 100 mm (4-inch) or 153 mm (6-inch) barrel. There is even a shorter version, where the barrel flushes with the forward front of the slide. Some models, probably the ESP85, have a longer trigger bar than the ESP85A, and also with a different placed disconnector-notch in the slide. These part do not interchange.

The ESP85 also has a simpler, all-steel trigger, whereas the ESP85A has a forward-rearward adjustable plastic-steel trigger.

The feeding ramp between the ESP85 and ESP85A is also a bit different. While one may attach the barrel to the frame, the trigger will not work, because rearward movement will stop against the feeding-ramp. But a usable conversion can be made with the help of a gunsmith.

Although the precision is on par with any top-notch target pistols, the high bore axis will increase felt recoil, and doesn't lend itself to ISSF rapid-fire matches. Reliability-problems are usually not an issue with these guns.

Other drawbacks are the simple trigger mechanism. It has a similar design to the other pocket-sized pistols of Erma. The Erma needs frequently cleaning in the trigger area, especially with the .22 version, since primer/gunpowder residue and bullet wax will make the trigger somewhat gritty and uneven.

Since the Erma has a magazine-grip, it has its limitations when it comes to grip-modifications. Shooters with stubby fingers will have problems reaching the trigger with the appropriate 90-degree angle. The grip-angle is somewhat shallow and outdated compared to new high-class pistols, meaning that the shooter must use more muscles to get a good shot.

Its strength lies in the somewhat sloppy fitting between slide and frame, securing reliability even after 2000 rounds without cleaning.

The ESP 85 is 255 mm (10 in) long with a 153 mm (6.0 in) barrel, and features single-action operation. It weighs 1,140 g (40 oz) empty, and the magazine capacity is eight rounds.

• Photograph and diagram at Pilkguns.com