MBAS assay

A methylene blue active substances assay, or MBAS assay, is a colorimetric analysis test method that uses methylene blue to detect the presence of anionic surfactants (such as a detergent or foaming agent) in a sample of water. An anionic surfactant detected by the color reaction is called a methylene blue active substance (MBAS).[1]

Method

After first acidifying a water sample (with boric acid, for example), one adds to it chloroform and a solution of methylene blue.[2] Methylene blue is a cationic dye. The biphasic solution is then agitated to distribute these reagents throughout the aqueous and organic phases.[2] If an anionic surfactant is present, then the cationic methylene blue and the anionic surfactant forms an ion pair, which is extracted into the organic phase. The color saturation of the chloroform increases with the concentration of anionic surfactants.

Standards

MBAS assay is an ASTM International standard technique for detecting anionic surfactants.[3] These include carboxylates, phosphates, sulfates, and sulfonates. An MBAS assay alone does not, however, identify specific surfactants.

In 2011, ASTM retired ASTM D2330-02, the 2002 revision of the standard, which they reviewed and replaced with a new revision.[3] As of 2026, the current revision of the standard is ASTM D2330-20, which was adopted on 24 February 2020.[4]

The publication Standard Methods for the Examination of Water and Wastewater lists the following methods used by certified laboratories testing wastewater in the United States.

  • Method 5540B describes surfactant separation by sublation.
  • Method 5540C discusses anionic surfactants as methylene blue active substances (MBAS).
  • Method 5540D discusses nonionic surfactants as cobalt thiocyanate active substances (CTAS).[5]

See also

Notes

  1. ^ Alison L. George, Graham F. White "Optimization of the methylene blue assay for anionic surfactants added to estuarine and marine water" Environmental Toxicology and Chemistry 1999, Volume 18, pages 2232–2236. doi:10.1002/etc.5620181016
  2. ^ a b "Regulation (EC) No 648/2004 of the European Parliament and of the Council of 31 March 2004 on detergents". EUR-Lex. Luxembourg: European Union. Document 32004R0648.
  3. ^ a b "ASTM D2330 - 02 Standard Test Method for Methylene Blue Active Substances". West Conshohocken: ASTM.
  4. ^ "Standard Test Method for Methylene Blue Active Substances". ASTM. 2020-02-24. doi:10.1520/D2330-20. Retrieved 2026-08-06.
  5. ^ Eaton, Andrew D.; Greenberg, Arnold E.; Rice, Eugene W.; Clesceri, Lenore S.; Franson, Mary Ann H., eds. (2005). Standard Methods For the Examination of Water and Wastewater (21 ed.). American Public Health Association. ISBN 978-0-87553-047-5. Also available on CD-ROM and online by subscription.

References

  • Nollet, Leo M. L.; De Gelder, Leen, eds. (2013). Handbook of Water Analysis (3rd ed.). Taylor & Francis.

Content Disclaimer

Informasi ini disarikan dari Wikipedia dan disajikan kembali untuk tujuan edukasi. Konten tersedia di bawah lisensi CC BY-SA 3.0. Kami tidak bertanggung jawab atas ketidakakuratan data yang bersumber dari kontribusi publik tersebut.

  1. The information displayed on this website is sourced in part or in whole from Wikipedia and has been adapted for the purpose of restating it. We strive to provide accurate and relevant information, however:
  2. There is no guarantee of absolute accuracy. Wikipedia is an open, collaborative project that can be edited by anyone, so information is subject to change.
  3. It is not intended to constitute professional advice. The content displayed is for informational and educational purposes only. For important decisions (e.g., medical, legal, or financial), please consult a professional.
  4. Content copyright. Wikipedia is licensed under the Creative Commons Attribution-ShareAlike License (CC BY-SA). This means that content may be reused with appropriate attribution and shared under a similar license.
  5. Responsible use. Any risk arising from the use of information from this website is entirely the responsibility of the user.