Multilink striping

Example of multilink striping

Multilink striping is a type of data striping used in telecommunications to achieve higher throughput or increase the resilience of a network connection by data aggregation over multiple network links simultaneously.[1]

Multipath routing and multilink striping are often used synonymously. However, there are some differences. When applied to end-hosts, multilink striping requires multiple physical interfaces and access to multiple networks at once. On the other hand, multiple routing paths can be obtained with a single end-host interface, either within the network, or, in case of a wireless interface and multiple neighboring nodes, at the end-host itself.

See also

References

  1. ^ "Multilink PPP Minimum Links Mandatory". Cisco. Retrieved 2026-05-29.

Content Disclaimer

Informasi ini disarikan dari Wikipedia dan disajikan kembali untuk tujuan edukasi. Konten tersedia di bawah lisensi CC BY-SA 3.0. Kami tidak bertanggung jawab atas ketidakakuratan data yang bersumber dari kontribusi publik tersebut.

  1. The information displayed on this website is sourced in part or in whole from Wikipedia and has been adapted for the purpose of restating it. We strive to provide accurate and relevant information, however:
  2. There is no guarantee of absolute accuracy. Wikipedia is an open, collaborative project that can be edited by anyone, so information is subject to change.
  3. It is not intended to constitute professional advice. The content displayed is for informational and educational purposes only. For important decisions (e.g., medical, legal, or financial), please consult a professional.
  4. Content copyright. Wikipedia is licensed under the Creative Commons Attribution-ShareAlike License (CC BY-SA). This means that content may be reused with appropriate attribution and shared under a similar license.
  5. Responsible use. Any risk arising from the use of information from this website is entirely the responsibility of the user.