ARTIKELDIGITAL.COM

The International Organization for Standardization (ISO) is an independent, non-governmental, international standard development organization composed...

ISO standards ISO, iso, or Iso may also refer to: Iso (supermarket), a chain of Danish supermarkets incorporated into the SuperBest chain in 2007 Iso...

ISO 4217 is a standard published by the International Organization for Standardization (ISO) that defines alpha codes and numeric codes for the representation...

ISO 8601 is an international standard covering the worldwide exchange and communication of date and time-related data. It is maintained by the International...

ISO 3166-1 alpha-2 codes are two-letter country codes defined in ISO 3166-1, part of the ISO 3166 standard published by the International Organization...

ISO 3166-1 (Codes for the representation of names of countries and their subdivisions – Part 1: Country code) is a standard defining codes for the names...

ISO 3166 is a standard published by the International Organization for Standardization (ISO) that defines codes for the names of countries, dependent...

The ISO 9000 family is a set of international standards for quality management systems. It was developed in March 1987 by the International Organization...

Standardization (ISO) created and maintains the ISO 3166 standard – Codes for the representation of names of countries and their subdivisions. The ISO 3166 standard...

International Organization for Standardization (ISO) international standard in 1971 and published as ISO 3297 in 1975. ISO subcommittee TC 46/SC 9 is responsible...

ISO 3166-2 is part of the ISO 3166 standard published by the International Organization for Standardization (ISO), and defines codes for identifying the...

ISO 7010 is a technical standard by the International Organization for Standardization for graphical hazard symbols on hazard and safety signs, including...

ISO 639 is a standardized nomenclature used to classify languages. Each language is assigned a two-letter (set 1) and three-letter lowercase abbreviation...

ISO 639-1:2002, Codes for the representation of names of languages—Part 1: Alpha-2 code, is the first part of the ISO 639 series of international standards...

ISO 7001 ("public information symbols") is a standard published by the International Organization for Standardization that defines a set of pictograms...

4999 ISO 5000 – ISO 7999 ISO 8000 – ISO 9999 ISO 10000 – ISO 11999 ISO 12000 – ISO 13999 ISO 14000 – ISO 15999 ISO 16000 – ISO 17999 ISO 18000 – ISO 19999...

ISO 639-2:1998, Codes for the representation of names of languages — Part 2: Alpha-3 code, is the second part of the ISO 639 standard, which lists codes...

ISO 50001 Energy management systems - Requirements with guidance for use, is an international standard created by the International Organization for Standardization...

ISO 20022 is widely used in financial services. ISO 20022 is the successor to ISO 15022; originally ISO 20022 was called ISO 15022 2nd Edition. ISO 15022...

Portable Document Format (PDF), standardized as ISO 32000, is a file format developed by Adobe in 1993 used to present documents, including text formatting...

Organization for Standardization (ISO), with the latest standard version ratified and published by ISO in October 2024 as ISO/IEC 14882:2024 (informally known...

ISO 639-3:2007, Codes for the representation of names of languages – Part 3: Alpha-3 code for comprehensive coverage of languages, is an international...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

An optical disc image (or ISO image, from the ISO 9660 file system used with CD-ROM media) is a disk image that contains everything that would be written...

ISO 26262, titled "Road vehicles – Functional safety", is an international standard for functional safety of electrical and/or electronic systems that...

ISO 19650 is a family of international standards for information management using building information modelling (BIM) across the life cycle of built...

ISO 8583 is an international standard for financial transaction card originated interchange messaging. It is the International Organization for Standardization...

ISO 45001 is an international standard for occupational health and safety management systems. It was developed in March 2018 by International Organization...

tests. ISO 16750 has five parts: ISO 16750-1: General ISO 16750-2: Electrical loads ISO 16750-3: Mechanical loads ISO 16750-4: Climatic loads ISO 16750-5:...

The ISO 14000 family is a set of international standards for environment management systems. It was developed in March 1996 by International Organization...

ISO 639 is a standard by the International Organization for Standardization (ISO) concerned with the representation of languages and language groups. It...

ISO 13485 Medical devices -- Quality management systems -- Requirements for regulatory purposes is a voluntary standard, published by International Organization...

Iso-LSD, also known as d-iso-LSD, (+)-iso-LSD, or (5R-8S)-LSD, as well as N,N-diethylisolysergamide, is a serotonin receptor modulator of the lysergamide...

ISO 21500, Guidance on Project Management, is an international standard developed by the International Organization for Standardization, or ISO starting...

ISO/IEC 20000-1 is the international standard for IT service management. It was originally developed in 2005 by ISO/IEC JTC1/SC7 and revised in 2011 and...

ISO 965 (ISO general purpose metric screw thread—tolerances) is an International Organization for Standardization (ISO) standard for metric screw thread...

and IEST petitioned to ISO for new standards, the first document of ISO 14644 was published in 1999, ISO 14644-1. In 2000, ISO 14644-2 was published,...

including Isothermos, Iso Autoveicoli Spa in 1952, Iso Rivolta in 1962, Iso Motors in 1973 and, in 2017, a return to ISO Rivolta. ISO Rivolta has its origins...

1992) is the ISO standard describing the International System of Units (SI). The ISO 1000:1992 standard was withdrawn in 2009 together with ISO 31, and are...

ISO 3166-1 alpha-3 codes are three-letter country codes defined in ISO 3166-1, part of the ISO 3166 standard published by the International Organization...

ISO/IEC 13490 (also known as ECMA-168) is the successor to ISO 9660 (level 3), intended to describe the file system of a CD-ROM or CD-R. ISO 13490 has...

ISO 11784 and ISO 11785 are international standards that regulate the radio-frequency identification (RFID) of animals, which is usually accomplished...

ISO 19092 Financial Services - Biometrics, released as ISO 19092 Financial Services - Biometrics - Part 1: Security framework, is an ISO standard and describes...

worldwide. Two supplementary standards, ISO 217 and ISO 269, define related paper sizes. All ISO 216, ISO 217 and ISO 269 paper sizes (except some envelopes)...

ISO 24617-1:2009, ISO-TimeML is the International Organization for Standardization ISO/TC37 standard for time and event markup and annotation. The scope...

ISO 14698 Standards features two International Standards on biocontamination control for cleanrooms. IEST, the Secretariat and Administrator of ISO Technical...

ISO 5426 ("Extension of the Latin alphabet coded character set for bibliographic information interchange") is a character set developed by ISO, similar...

of ISO 13584 is Industrial automation systems and integration - Parts library, with the acronym PLIB. PLIB is developed and maintained by the ISO technical...

numerical scales, the most recent being the ISO system introduced in 1974. A closely related system, also known as ISO, is used to describe the relationship...

revised and replaced by ISO/IEC 80000. The standard comes in 14 parts: ISO 31-0: General principles (replaced by ISO/IEC 80000-1:2009) ISO 31-1: Space and time...

ISO 1629, Rubber and latices – Nomenclature is an ISO standard. This standard was originally published in 1976, and was updated in 1987, 1995 (with amendments...

ISO 7637 Road vehicles -- Electrical disturbances from conduction and coupling is an international electromagnetic compatibility vehicle standard published...

International Organization for Standardization (ISO) and was published in 1970 as international standard ISO 2108 (any 9-digit SBN can be converted to a 10-digit...

ISO 19600, Compliance management systems - Guidelines, is a compliance standard introduced by the International Organization for Standardization (ISO)...

Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Each part is numbered: ISO/IEC 8859-1, ISO/IEC 8859-2, etc. There are...

objects, standardized by the International Organization for Standardization (ISO). DOIs are an implementation of the Handle System; they also fit within the...

ISO 5964 was the ISO standard for the establishment and development of multilingual thesauri. Its full title was Guidelines for the establishment and development...

locations. The first edition (ISO 6709:1983) was developed by ISO/IEC JTC 1/SC 32. Later the standard was transferred to ISO/TC211, Geographic information/Geomatics...

ECMA-376. ISO and IEC standardized later versions as ISO/IEC 29500. Microsoft Office 2010 provides read support for ECMA-376, full support for ISO/IEC 29500...

ISO 15118 Road vehicles -- Vehicle to grid communication interface is an international standard defining a vehicle to grid (V2G) communication interface...

ISO 10218 is an international standard for industrial robot safety, developed by ISO/TC 184/SC 2 "Robots and robotic devices" in parallel with the European...

ISO 21001, Educational Organization Management Systems, is a published international standard by the International Organization for Standardization, and...

ISO 1 is an international standard set by the International Organization for Standardization that specifies the standard reference temperature for geometrical...

engineering diagrams. ISO 10628 consists of the following parts: Part 1: Specification of Diagrams (ISO 10628-1:2014) Part 2: Graphical Symbols (ISO 10628-2:2012)...

ISO 3166-2:IN is part of the ISO 3166 standardization codes published by the International Organization for Standardization (ISO) for India. It is part...

ISO 9 is an international standard establishing a system for the transliteration into Latin characters of Cyrillic characters constituting the alphabets...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

The international standard ISO 233 establishes a system for romanization of Arabic script. It was supplemented by ISO 233-2 in 1993 which is specific for...

ISO/IEC 27000 is one of the standards in the ISO/IEC 27000 series of information security management systems (ISMS)-related standards. The formal title...

ISO 259 is a series of international standards for the romanization of Hebrew characters into Latin characters, dating to 1984, with updated ISO 259-2...

Standardization. ISO 10006:2018 gives guidance on the application of quality management in projects. It supersedes ISO 10006:2003. ISO 10006 is applicable...

Technical Committee 212 (ISO/TC 212). ISO/TC 212 assigned ISO 15189 to a working group to prepare the standard based on the details of ISO/IEC 17025:1999 General...

ISO 28000:2022, Security and resilience – Security management systems – Requirements, is a management system standard published by International Organization...

ISO 7027:1999 is an ISO standard for water quality that enables the determination of turbidity. The ISO 7027 technique is used to determine the concentration...

ISO 10160 is the ISO standard, first published in 1993, that defines the terminology that is used for interlibrary loan transactions between various document...

ISO 668 – Series 1 freight containers – Classification, dimensions and ratings is an ISO international standard which nominally classifies intermodal freight...

ISO 9241 is a multi-part standard from the International Organization for Standardization (ISO) covering ergonomics of human-system interaction and related...

ISO 2709 is an ISO standard for bibliographic descriptions, titled Information and documentation—Format for information exchange. It is maintained by the...

ISO 128 is the International Organization for Standardization (ISO) standard covering the general principles of presentation in technical drawings, specifically...

ISO 13399 (Cutting tool data representation and exchange) is an international technical standard by ISO (the International Organization for Standardization)...

ISO 6344 is an international standard covering the definition and measurement of particle size for fused alumina (i.e., corundum) and silicon carbide...

to the ISO, Some existing code elements in ISO 639-2, and the corresponding code elements in ISO 639-1, are designated in those parts of ISO 639 as individual...

Standardization (ISO). It was developed by ISO Technical Committee 37, Subcommittee 2, and first published on May 15, 2008. It is part of the ISO 639 series...

ISO 31-7 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to acoustics. It is superseded by...

ISO 22000 is a food safety management system by the International Organization for Standardization (ISO) which is outcome focused, providing requirements...

a standard specified as a part of the MPEG-4 specifications, formally as ISO/IEC 14496-14:2003. Unlike the audio-only compression formats MP3 and MP2...

ISO 10161 is the ISO standard, first published in 1993, that defines the interlibrary loan (ILL) application protocol for communication between various...

ISO 31-1 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to space and time. It was superseded...

ISO/IEC 19790 is an ISO/IEC standard for security requirements for cryptographic modules. It addresses a wide range of issues regarding their implementation...

ISO 3103 is a standard published by the International Organization for Standardization (commonly referred to as ISO), specifying a standardized method...

ISO 3166-2:GB is the entry for the United Kingdom of Great Britain and Northern Ireland (GBNI) in ISO 3166-2, part of the ISO 3166 standard published...

ISO 17100:2015 Translation Services-Requirements for Translation Services was published on May 1, 2015. It was prepared by the International Organization...

ISO 20400:2017 Sustainable procurement — Guidance is a standard by the International Organization for Standardization (ISO) that provides guidance to organizations...

ISO 11170:2003 is an international standard which defines a sequence of tests for verifying filter elements. It can be used to check their hydraulic,...

ISO 25964 is the international standard for thesauruses, published in two parts as follows: ISO 25964 Information and documentation - Thesauri and interoperability...

The ISO 217:2013 standard defines the RA and SRA paper formats. These paper series are untrimmed raw paper. RA stands for "raw format A" and SRA stands...

ISO 13849 is a safety standard which applies to parts of machinery control systems that are assigned to providing safety functions (called safety-related...

The Iso Lele (or Iso Rivolta Lele) is a grand tourer that was produced by the Italian automobile manufacturer Iso Automoveicoli S.p.A. between 1969 and...

ISO 20700 Guidelines for management consultancy services is an international standard developed for use as a guideline for people or organizations for...

ISO 11940 is an ISO standard for the transliteration of Thai characters, published in 1998, updated in September 2003, and confirmed in 2008. A most notable...

ISO/IEC 15504 Information technology – Process assessment, also termed Software Process Improvement and Capability dEtermination (SPICE), is a set of...

ISO 20121 (full name: ISO 20121:2012, Event sustainability management systems –- Requirements with guidance for use) is a voluntary international standard...

ISO/IEC 27002 is an information security standard published by the International Organization for Standardization (ISO) and by the International Electrotechnical...

predate ISO standardization and were developed by Kodak. ISO order page for ISO 732:1982 ISO order page for ISO 732:1991 ISO order page for ISO 732:2000...

ISO/IEC TR 12182 is an Information technology standard published in 1998 by the Joint Task Committee 1 (JTC1) of the International Organization for Standardization...

ISO 3166-2:AU is the entry for Australia in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

Food safety ISO 874 ISO 2859 ISO 3951 ISO 5667 - contains the guidances of water sampling for food industries ISO 6206 ISO 8213 List of ISO standards United...

ISO 31-6 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to light and related electromagnetic...

ISO/IEC 8859-15:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 15: Latin alphabet No. 9, is part of the ISO/IEC...

ISO 55000 is an international standard covering management of assets of any kind. Before it, a Publicly Available Specification (PAS 55) was published...

ISO 31000 is a set of international standards for risk management. It was developed in November 2009 by International Organization for Standardization...

ISO 6438:1983, Documentation — African coded character set for bibliographic information interchange, is an ISO standard for an 8-bit character encoding...

ISO 10007 "Quality management — Guidelines for configuration management" is the ISO standard that gives guidance on the use of configuration management...

List of ISO standards for transliterations and romanizations: ISO 3602:1989 (Romanization of Japanese (kana script)) ISO 7098:2015 (Romanization of Chinese)...

ISO 9847, Solar energy — Calibration of field pyranometers by comparison to a reference pyranometer, is an ISO standard for the calibration of pyranometers...

ISO 31-0 is the introductory part of international standard ISO 31 on quantities and units. It provides guidelines for using physical quantities, quantity...

ISO 37001 Anti-bribery management systems - Requirements with guidance for use, is a management system standard published by International Organization...

ISO 25119, titled "Tractors and machinery for agriculture and forestry – Safety-related parts of control systems", is an international standard for functional...

technical standard defined by ISO which describes title block formats to be used in technical drawings. ISO 7200:1984 ISO 7200:2004 ISO 128 for the general principles...

ISO 690 is an ISO standard governing bibliographic references in different kinds of documents, including electronic documents. This international standard...

ISO 14971 Medical devices — Application of risk management to medical devices is a voluntary consensus standard, published by International Organization...

alone, up to 95% of intermodal containers comply with ISO standards, and can officially be called ISO containers. These containers are known by many names:...

2020. "ISO 22301:2019". ISO. "Iso/Ts 22317:2021". "Iso/Ts 22318:2021". "ISO/TS 22330:2018". ISO. 12 July 2019. "ISO/TS 22331:2018". ISO. "Iso/Ts 22332:2021"...

2012). "ISO publishes new standard for business continuity management". ISO. "ISO 22313:2020". ISO. "Iso/Ts 22317:2021". "Iso/Ts 22318:2021". "ISO/TS 22330:2018"...

ISO 14064 standard (initially published in 2006 and updated in 2018) is the core part of the ISO 14060 family of standards that are part of the ISO 14000...

ISO 6943 is a specification created by the International Organization for Standardization for a method in determining the tension fatigue of vulcanised...

ISO 2788 was the ISO international standard for monolingual thesauri for information retrieval, first published in 1974 and revised in 1986. The official...

ISO 19114 Geographic information - Quality evaluation procedures provides a procedural framework for evaluating the quality of digital geographic datasets...

ISO 15924, Codes for the representation of names of scripts, is an international standard defining codes for writing systems or scripts (a "set of graphic...

ISO 26000 is a set of international standards for social responsibility. It was developed in November 2010 by International Organization for Standardization...

ISO 14224 Petroleum, petrochemical and natural gas industries -- Collection and exchange of reliability and maintenance data for equipment is the International...

ISO 3864 is an International Organization for Standardization technical standard for safety signs and markings in workplaces and public facilities. These...

ISO 10303 (Automation systems and integration — Product data representation and exchange) is a family of ISO standards for computer-interpretable representation...

The ISO/IEC 15288 Systems and software engineering — System life cycle processes is a technical standard in systems engineering which covers processes...

ISO/IEC 27001, titled Information security, cybersecurity and privacy protection — Information security management systems — Requirements, is an information...

The ISO 14031:2013 Environmental management - Environmental Performance Evaluation – Guidelines standard by the International Organization for Standardization...

ISO 31-4 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to heat. It is superseded by ISO...

ISO 13567 is an international computer-aided design (CAD) layer standard The standard is divided into three parts: ISO 13567-1:2017 Technical product documentation...

ISO 15926 is a standard for data integration, sharing, exchange, and hand-over between computer systems. The title, "Industrial automation systems and...

stationery, cards, and for some printed documents. Most countries adhere to the ISO 216 standard, which includes the widely recognized A series (including A4...

ISO 19011 is an international standard that sets forth guidelines for management systems auditing. The current version is ISO 19011:2026. It is developed...

the International Organization for Standardization in ISO 3779 (content and structure) and ISO 4030 (location and attachment). There are vehicle history...

ISO 3166-2:US is the entry for the United States in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO/IEC 2022 Information technology—Character code structure and extension techniques, is an ISO/IEC standard in the field of character encoding. It is...

The ISO week date system is effectively a leap week calendar system that is part of the ISO 8601 date and time standard issued by the International Organization...

file? See media help. The Iso Grifo is a limited production grand tourer manufactured by Italian automobile manufacturer Iso Autoveicoli S.p.A. between...

ISO 9660 (also known as ECMA-119, or on Windows as CDFS) is a file system for optical disc media. The file system is an international standard available...

ISO/IEC 9995 Information technology — Keyboard layouts for text and office systems is an ISO/IEC standard series defining layout principles for computer...

IETF language tags combine subtags from other standards such as ISO 639, ISO 15924, ISO 3166-1 and UN M.49. For example, the tag en stands for English;...

ISO 6862 is an International Standard and a character set developed by ISO. "ISO 6862:1996(en). Information and documentation". ISO. "Mathematical coded...

ISO 3166-3 is part of the ISO 3166 standard published by the International Organization for Standardization (ISO), and defines codes for country names...

ISO 8178 is a collection of steady state test cycles used for defining emission standards for non-road engines in the European Union, United States, Japan...

defined in part two (ISO 639-2) of the standard, including the corresponding two-letter (ISO 639-1) codes where they exist. Where two ISO 639-2 codes are given...

ISO 10962, known as Classification of Financial Instruments (CFI), is a six-letter-code used in the financial services industry to classify and describe...

ISO/IEC 8859-2:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 2: Latin alphabet No. 2, is part of the ISO/IEC 8859...

ISO 9362 is an international standard for Business Identifier Codes (BIC), a unique identifier for business institutions, approved by the International...

The ISO/IEC 11179 metadata registry (MDR) standard is an international ISO/IEC standard for representing metadata for an organization in a metadata registry...

ISO 8000 is the international standard for Data Quality and Master Data. Widely adopted internationally it describes the features and defines the requirements...

ISO/IEC 646, is an ISO/IEC standard in the field of character encoding. It is equivalent to the ECMA standard ECMA-6 and developed in cooperation with...

ISO/IEC 8859-10:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 10: Latin alphabet No. 6, is part of the ISO/IEC...

ISO 3166-2:CA is the entry for Canada in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

Svalbard og Jan Mayen, ISO 3166-1 alpha-2: SJ, ISO 3166-1 alpha-3: SJM, ISO 3166-1 numeric: 744) is a statistical designation defined by ISO 3166-1 for a collective...

ISO 3166-2:ES is the entry for Spain in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

sovereign states and self-governing dependent territories based upon the ISO standard ISO 3166-1. The list also includes unrecognized but de facto independent...

ISO 22300:2025 Security and resilience – Vocabulary, is an international standard developed by the International Organization for Standardization Technical...

ISO 31-11:1992 was the part of international standard ISO 31 that defines mathematical signs and symbols for use in physical sciences and technology....

ISO 31-5 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to electricity and magnetism. It...

ISO/IEC 8859-4:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 4: Latin alphabet No. 4, is part of the ISO/IEC 8859...

ISO/IEC 8859-1, commonly referred to as Latin-1, is a character encoding in the ISO/IEC 8859 series of ASCII-based standard character encodings. It encodes...

ISO 39001:2012 Road traffic safety (RTS) management systems - Requirements with guidance for use is an ISO standard for a management system (similar to...

ISO C, and Standard C are successive standards for the C programming language published by the American National Standards Institute (ANSI) and ISO/IEC...

A delta ISO is used to update an existing ISO image which contains RPM Package Manager (RPM) files. It utilizes DeltaRPMs, a form of delta compression...

ISO/IEC 8652 Information technology — Programming languages — Ada is the international standard for the computer programming language Ada. It was produced...

ISO 2047 (Information processing – Graphical representations for the control characters of the 7-bit coded character set) is a standard for graphical...

ISO 15971 is an ISO standard for calorific value measurement of natural gas and its substitutes. The methods it covered does not involve gas composition...

ISO 22395:2018, Security and resilience -- Community resilience -- Guidelines for supporting vulnerable persons in an emergency, is an international standard...

ISO 3166-2:RU is the entry for Russia in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

Isō Station (石生駅, Isō-eki) is a passenger railway station located in the city of Tamba, Hyōgo Prefecture, Japan, operated by West Japan Railway Company...

ISO 14617 Graphical symbols for diagrams is a library of graphical symbols for diagrams used in technical applications. ISO 14617 consists of the following...

ISO 10014:2006 Quality management – Guidelines for realizing financial and economic benefits with ISO 9001:2000 is an International standard issued by...

ISO 15022 is an ISO standard for securities messaging used in transactions between financial institutions. Participants in the financial industry need...

ISO 4 (Information and documentation — Rules for the abbreviation of title words and titles of publications) is an international standard which defines...

ISO/TR 11941:1996 (Information and documentation — Transliteration of Korean script into Latin characters) is a Korean romanization system used in International...

Iso-THIP, or isoTHIP, is a selective and potent GABAA-ρ receptor (GABAC receptor) antagonist related to gaboxadol (THIP). It is 4-fold more potent than...

ISO 9060, Specification and classification of instruments for measuring hemispherical solar and direct solar radiation, is an ISO standard for the classification...

ISO 42500 "Sharing economy - General principles" is an international standard issued by the International Organization for Standardization that identifies...

ISO 31-3 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to mechanics. It was published on...

ISO 5428:1984, Greek alphabet coded character set for bibliographic information interchange, is an ISO standard for an 8-bit character encoding for the...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

ISO 3166-2:IT is the entry for Italy in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 10303 can represent 3D objects in computer-aided design (CAD) and related information. A STEP-file is ASCII text with the format defined in ISO 10303-21...

The ISO metric screw thread is the most commonly used type of general-purpose screw thread worldwide. They were one of the first international standards...

The Iso Varedo was a concept car produced by Italian car manufacturer Iso Autoveicoli S.p.A. in 1972 styled by Ercole Spada. It was unveiled at the 1972...

ISO 5776, published by the International Organization for Standardization (ISO), is an international standard that specifies symbols for proofreading such...

Iso Omena (Finnish for "Big Apple") is a shopping centre in Matinkylä, Espoo, Finland, opened on September 24, 2001. The construction of Iso Omena aimed...

ISO/IEC 7816 is an international standard related to electronic identification cards with contacts, especially smart cards, and more recently, contactless...

an ISO standard covering petroleum products, developed by ISO's Technical Committee (TC) 28: Petroleum products and lubricants. According to ISO's abstract...

ISO/IEC 8859-8, Information technology — 8-bit single-byte coded graphic character sets — Part 8: Latin/Hebrew alphabet, is part of the ISO/IEC 8859 series...

ISO/IEC 8859-16:2001, Information technology — 8-bit single-byte coded graphic character sets — Part 16: Latin alphabet No. 10, is part of the ISO/IEC...

technology agreed upon by the ISO/IEC Moving Picture Experts Group (MPEG) (ISO/IEC JTC 1/SC29/WG11) under the formal standard ISO/IEC 14496 – Coding of audio-visual...

ISO 11783-1: General standard for mobile data communication ISO 18883-2: Physical layer ISO 11783-3: Data link layer ISO 11783-4: Network layer ISO 11783-5:...

ISO 6346 is an international standard covering the coding, identification and marking of intermodal (shipping) containers used within containerized intermodal...

such as those from the International Organization for Standardization (ISO) describe a different system which has some nuanced differences in its interpretation...

ISO 15919 is an international standard for the romanization of Indic scripts. Published in 2001, it is part of a series of romanization standards by the...

ISO 9897 is an ISO international standard for electronic interchange relating to freight containers. It is also known as 'CEDEX' as an acronym of Container...

ISO-8859-8-I is the IANA charset name for the character encoding ISO/IEC 8859-8 used together with the control codes from ISO/IEC 6429 for the C0 (00–1F...

commercial trade names such as: Iso E Super, Iso Gamma Super, Anthamber, Amber Fleur, Boisvelone, Iso Ambois, Amberlan, Iso Velvetone, Orbitone, Amberonne...

ISO/IEC 8859-13:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 13: Latin alphabet No. 7, is part of the ISO/IEC...

ISO/IEC 27006 is an information security standard published by the International Organization for Standardization (ISO) and the International Electrotechnical...

ISO/IEC 27001 Lead Implementer is a professional certification for professionals specializing in information security management systems (ISMS) based...

ISO/IEC 8859-3:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 3: Latin alphabet No. 3, is part of the ISO/IEC 8859...

Tomiaki Iso (礒 富昭, Iso Tomiaki; born 20 April 1954) is a Japanese rower. He competed in the men's eight event at the 1976 Summer Olympics. Evans, Hilary;...

and has MIB 52. It is also known as iso-ir-50 (after the ISO 2022 registration of its G1 set) and csISO50INIS8. ISO-IR-51, "INIS Cyrillic Extension", is...

Standardization (ISO) released CAN standard ISO 11898, which was later restructured into two parts: ISO 11898-1 which covers the data link layer, and ISO 11898-2...

Experts Group (MPEG) is an alliance of working groups established jointly by ISO and IEC that sets standards for media coding, including compression coding...

developed by ISO technical committee ISO/TC 251. ISO 55001 was published for the first time in January 2014. The ISO 55001:2014 adopts the "ISO High Level...

Mitsuo Iso (磯 光雄, Iso Mitsuo; born 1966 in Aichi, Japan) is a Japanese animator and director. He worked as a freelance artist through Neomedia, Studio...

ISO 19439:2006 Enterprise integration—Framework for enterprise modelling, is an international standard for enterprise modelling and enterprise integration...

International standard ISO 2145 defines a typographic convention for the "numbering of divisions and subdivisions in written documents". It applies to...

ISO 20671 Brand evaluation - Principles and fundamentals, renumbered ISO 20671-1 in November 2021, is an international standard issued by the International...

Bosnian: ISO 639-1 code: bs; ISO 639-3 code: bos Chakavian: ISO 639-3 code: ckm Croatian: ISO 639-1 code: hr; ISO 639-3 code: hrv Montenegrin: ISO 639-3...

ISO 15765-2, or ISO-TP (Transport Layer), is an international standard for sending data packets over a CAN bus. The protocol allows for the transport...

known as a data directory or data inventory). ISO 19115:2013 "Geographic Information – Metadata" from ISO/TC 211, the industry standard for geospatial...

ISO 3166-2:BR is the entry for Brazil in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 2852 Stainless steel clamp pipe couplings for the food industry was an international standard that defines a non-permanent sanitary food-grade piping...

ISO/IEC 14443 Identification cards – Contactless integrated circuit cards – Proximity cards is an international standard that defines proximity cards...

Standardization (ISO), in particular, in ISO 14040 and ISO 14044. ISO 14040 provides the 'principles and framework' of the Standard, while ISO 14044 provides...

International standard ISO/IEC 11801 Information technology — Generic cabling for customer premises specifies general-purpose telecommunication cabling...

ISO/IEC 17024: Conformity assessment - General requirements for bodies operating certification of persons is an ISO/IEC standard which specifies criteria...

The ISO-standard ISO 15398 regulates the minimum requirements, proofs of suitability and auditing standards for manhole covers made of thermoplastics....

ISO 12006 is within the discipline of architecture for building construction. ISO 12006 "Building construction - Organization of information about construction...

ISO 3166-2:DE is the entry for Germany in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO/TC 37 is a technical committee within the International Organization for Standardization (ISO) that prepares standards and other documents concerning...

ISO/IEC 80000, Quantities and units, is an international standard describing the International System of Quantities (ISQ). It was developed and promulgated...

Alpha acids may be isomerized to form iso-alpha acids by the application of heat in solution. Iso-alpha acids (iso-α-acids) are typically produced in beer...

ISO 4165 is a standard adopted by the International Organization for Standardization (ISO) that describes a double-pole DC connector to supply between...

ISO 10012 is a standard published by the International Organization for Standardization (ISO) which defines requirements for measurement process management...

ISO 2848 (Building construction – Modular coordination – Principles and rules) is an international standard for the construction industry that describes...

ISO 25178: Geometrical Product Specifications (GPS) – Surface texture: areal is an International Organization for Standardization collection of international...

Unicode) is a standard set of characters defined by the international standard ISO/IEC 10646, Information technology — Universal Coded Character Set (UCS) (plus...

The ISO 2033:1983 standard ("Coding of machine readable characters (MICR and OCR)") defines character sets for use with Optical Character Recognition...

Standardization (ISO) within Technical Committee ISO/TC 121 "Anaesthetic and respiratory equipment" in the subcommittee "ISO/TC 121/SC 3/JWG 7 - Joint ISO/TC 121/SC...

MPEG-4 Part 11 Scene description and application engine was published as ISO/IEC 14496-11 in 2005. MPEG-4 Part 11 is also known as BIFS, XMT, MPEG-J....

MagicISO (also referred to as MagicISO Maker) is a discontinued CD/DVD image shareware utility that can extract, edit, create, and burn disc image files...

ISO 15489 Information and documentation—Records management is an international standard for the management of business records, consisting of two (2)...

https://www.iso.org/obp/ui/#iso:std:iso-iec:27701:ed-1:v1:en ISO/IEC 27701:2019 [ISO/IEC 27701:2019] Table of contents ISO/IEC 27701 page from ISO ISO article...

ISO 31-8 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to physical chemistry and molecular...

The ISO base media file format (ISOBMFF) is a container file format that defines a general structure for files that contain time-based multimedia data...

clearing, reporting and settlement of trades. Its structure is defined in ISO 6166. The ISIN code is a 12-character alphanumeric code that serves for uniform...

l-Iso-LSD, also known as (–)-iso-LSD or (5S,8R)-iso-LSD, as well as l-isolysergic acid diethylamide, is a lysergamide and one of four possible stereoisomers...

ISO 2146 is an ISO standard defining an information model for "registry services for libraries and related organisations". Operating at a higher level...

ISO 18245 is an ISO standard concerning the assignment of merchant category codes (MCC) in retail financial services. These are used to control usage...

defined in ISO 646 (ASCII). C1 codes are the range 80HEX–9FHEX and the default C1 set was originally defined in ECMA-48 (harmonized later with ISO 6429)....

ISO 3166-2:NL is the entry for the Kingdom of the Netherlands in ISO 3166-2, part of the ISO 3166 standard published by the International Organization...

ISO 17800 is an international standard for the Facility Smart Grid Information Model (FSGIM), which is currently under development. ISO 17800 is one of...

ISO 9846, Solar energy -- Calibration of a pyranometer using a pyrheliometer, is the ISO standard for the calibration of a pyranometer using a pyrheliometer...

ISO/IEC 8859-9:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 9: Latin alphabet No. 5, is part of the ISO/IEC 8859...

ISO 21482 is a technical standard that specifies the design and usage of a "supplemental radiation warning symbol", a warning symbol. It is intended to...

success, also notes that the ISO EBNF is not even used in all ISO standards. This article uses EBNF as specified by the ISO for examples applying to all...

ISO 31-10 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to nuclear reactions and ionizing...

ISO/IEC 27040 is part of a growing family of International Standards published by the International Organization for Standardization (ISO) and the International...

ISO/IEC 21827 (SSE-CMM – ISO/IEC 21827) is an international standard based on the Systems Security Engineering Capability Maturity Model (SSE-CMM) developed...

ISO 5775 is an international standard for labeling the size of bicycle tires and rims. The system used was originally developed by the European Tyre and...

ISO 3166-2:CH is the entry for Switzerland in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO 9564 is an international standard for personal identification number (PIN) management and security in financial services. The PIN is used to verify...

ISO 14155 Clinical investigation of medical devices for human subjects -- Good clinical practice This international standard addresses good clinical practices...

ISO 1745:1975 Information processing – Basic mode control procedures for data communication systems is an early ISO standard defining a Telex-oriented...

ISO 3166-2:BE is the entry for Belgium in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

"Iso 56000:2020". 17 December 2020. "Iso/Awi 56001". "Iso/Awi 56001". "Iso 56003:2019". 17 December 2020. "Iso/Tr 56004:2019". 17 December 2020. "Iso 56006:2021"...

Iso Milovančev (1902 – 1968) was a Yugoslav wrestler. He competed in the men's Greco-Roman featherweight at the 1928 Summer Olympics. Evans, Hilary; Gjerde...

ISO/IEC 15693, is an ISO/IEC standard for Contactless vicinity objects (vicinity cards and security devices ), i.e. objects which can be read from a greater...

ISO 11992 (Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles) is a CAN-based vehicle bus...

query language for property graphs first described in ISO/IEC 39075, released in April 2024 by ISO/IEC. The GQL project is the culmination of converging...

ISO 14223 Radiofrequency identification of animals — Advanced transponders is an international standard that specifies the structure of the radio frequency...

the regulations of the ISO/IEC 33xxx family (process assessment), e.g., ISO/IEC 33001, ISO/IEC 33002, ISO/IEC 33004, and ISO/IEC 33020. The name Automotive...

the international standard ISO 13616 under the International Organization for Standardization (ISO). The current version is ISO 13616:2020, which indicates...

ISO 3166-2:SH is the entry for Saint Helena, Ascension and Tristan da Cunha in ISO 3166-2, part of the ISO 3166 standard published by the International...

ISO 639-6, Codes for the representation of names of languages—Part 6: Alpha-4 code for comprehensive coverage of language variants, was a proposed international...

ISO 14555 is an ISO standard for arc stud welding of metallic materials. It was incorporated as a European Norm as EN (ISO) 14555 and is referenced by...

ISO 3166-2:JP is the entry for Japan in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

into the Open Systems Interconnection suite of protocols. ISO/IEC 9594 is the corresponding ISO/IEC identification. The protocols defined by X.500 include:...

ISO/IEC 8859-14:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 14: Latin alphabet No. 8 (Celtic), is part of the...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

UltraISO is a crippleware application for Microsoft Windows for creating, modifying and converting ISO image files used for optical disc authoring, currently...

ISO 2 is an international standard for direction of twist designation for yarns, complex yarns, slivers, slubbings, rovings, cordage, and related products...

ISO-IR-197 (known by the ISO-IR registration number of its GR set) is an 8-bit, single-byte character encoding which was designed for the Sámi languages...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

list of ISO 639 codes and IETF language tags (BCP 47) for individual constructed languages, complete as of January 2023[update]. ISO 639-2 and ISO 639-5...

ISO/IEC 8859-5:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 5: Latin/Cyrillic alphabet, is part of the ISO/IEC...

ISO 13406-2 is an ISO standard, with the full title "Ergonomic requirements for work with visual displays based on flat panels -- Part 2: Ergonomic requirements...

Iso-butomidate is an anesthetic drug related to etomidate, which has been sold as a designer drug as an active ingredient in e-cigarette liquids marketed...

Iso-Syöte is the southernmost fell in Finland, adjacent to the Syöte National Park that is named after the fell. Located approximately 150 kilometres...

The Iso Fidia (or Iso Rivolta Fidia), initially Iso Rivolta S4, is a four-door sedan which was produced by the Italian automobile maker Iso Automoveicoli...

IEC-P27-1 (or ISO IR-143) is an 8-bit character set developed by the IEC. When combined with the ISO/IEC 646 character set, this includes all characters...

ISO 7736 is a standard size for dashboard mounted head units, for car audio. It was originally established by the German national organization for standardization...

ISO/IEC JTC 1/SC 22 Programming languages, their environments and system software interfaces is a standardization subcommittee of the Joint Technical...

ISO 44001 Collaborative business relationship management systems – Requirements and framework is an international standard published on 1 March 2017 by...

ISO/IEC 5218 Information technology — Codes for the representation of human sexes is an international standard that defines a representation of human...

Iso lo is a 1994 documentary film. A glimpse into Ismaël Lô's musical universe. Shot during one of his tours, this peregrination into Africa's heart directed...

ISO 3166-2:NO is the entry for Norway in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

Standardization based on ISO 9001, and the first edition was published in June 1999 as ISO/TS 16949:1999. IATF 16949:2016 replaced ISO/TS 16949 in October...

ISO/IEC 9529 (Information processing systems — Data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording...

ISO 898 is an international standard that defines mechanical and physical properties for metric fasteners. This standard is the origin for other standards...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

shoe are defined by the International Organization for Standardization (ISO) in ISO 518:2006. Details such as trigger voltage are not standardised; electrical...

ISO/IEC 7812 Identification cards – Identification of issuers is an international standard published jointly by the International Organization for Standardization...

ISO 3166-2:HK is the entry for Hong Kong in ISO 3166-2, which was published in 1998 by the International Organization for Standardization (ISO) to define...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

ISO 15686 is the in development ISO standard dealing with service life planning. It is a decision process which addresses the development of the service...

Isotetrahydrocannabinol (iso-THC or Δ8-Isotetrahydrocannabinol) is a phytocannabinoid commonly found as a component in synthetic THC which has been made...

ISO/IEC 6523, Information technology – Structure for the identification of organizations and organization parts, is an international standard that defines...

The ISO/IEC 27001 Lead Auditor certification consists of a professional certification for auditors specializing in information security management systems...

Isos or ISOS may refer to: Isos (Boeotia), a town of ancient Boeotia, Greece Isos (Megaris), a town of ancient Megaris, Greece Isos Sinasos, a Greek dance...

ISO/IEC/IEEE 12207 Systems and software engineering – Software life cycle processes is an international standard for software lifecycle processes. Introduced...

control standards and certification and made most of his money running an ISO 9000 registrar firm. His registrar firm would have its license suspended...

For product and manufacturing information, STEP-XML is a short term for ISO 10303-28, Industrial automation systems and integration—Product data representation...

ISO 11171 is an international standard for calibrating liquid particle counters. As the functionality of hydraulic fluids suffers when contaminated with...

22322:2015". ISO. 13 November 2015. "ISO 22324:2015". ISO. 13 November 2015. "ISO 22325:2016". ISO. "ISO 22326:2018". ISO. "ISO/TR 22351:2015". ISO. "ISOTC292"...

cargo. It is built to the ISO standards, making it suitable for different modes of transportation; as such, it is also called an ISO tank. Both hazardous and...

ISO/IEC 7813 is an international standard codified by the International Organization for Standardization and International Electrotechnical Commission...

The ISO/IEC 27000 family (also known as the 'ISMS Family of Standards', 'ISO27K', or 'ISO 27000 series') comprises information security standards published...

ISO/IEC 4909 is a 2006 international standard produced by the International Organization for Standardization (ISO) and the International Electrotechnical...

The ISO 15926 is an interoperability standard in the process industry. ISO 15926 includes the Work in Progress (WIP) database. WIP is available online...

MPEG-D is a group of standards for audio coding formally known as ISO/IEC 23003 - MPEG audio technologies, published since 2007. MPEG-D consists of four...

International standards in the ISO/IEC 19770 family of standards for IT asset management address both the processes and technology for managing software...

ISO 3166-2:MX is the entry for Mexico in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

Countess Iso Mutsu (陸奥 イソ, Mutsu Iso; 1867 – 1930), born Gertrude Ethel Passingham, was a British writer. She married a Japanese nobleman and diplomat...

ISO 3166-2:BQ is the entry for Bonaire, Sint Eustatius and Saba in ISO 3166-2, part of the ISO 3166 standard published by the International Organization...

delimiters. ISO 11940-2 is an ISO standard for a simplified transcription of the Thai language into Latin characters. The full standard ISO 11940-2:2007...

2001. May 2000 ISO/IEC 15445:2000 ("ISO HTML", based on HTML 4.01 Strict) was published as an ISO/IEC international standard. In the ISO, this standard...

ISO. "ISO 22316:2017". ISO. 15 September 2020. "ISO 28001:2007". ISO. "ISO 28003:2007". ISO. "ISO 28004-1:2007". ISO. "ISO 28004-3:2014". ISO. "ISO 28004-4:2014"...

ISO 20815 is the International Organization for Standardization (ISO) standard for production assurance and reliability management in the petroleum, petrochemical...

Iso-Kiimanen is a lake of Finland in the Oulujoki main catchment area. It is located in Sotkamo municipality in Kainuu region. List of lakes in Finland...

ISO 999 (Information and documentation—Guidelines for the content, organization and presentation of indexes) is an ISO standard which provides the information...

ISO and DSIT codes: Myanmar uses MYA, China CHN, and Cambodia KH (ISO codes), Thailand uses T (DSIT code), Laos LAO, and Vietnam VN (coincident ISO and...

(IPA), and the 26 most widespread letters are the letters contained in the ISO basic Latin alphabet, which are the same letters as the English alphabet...

to ISO/IEC JTC 1/SC 37 include: ISO/IEC JTC 1 ISO/IEC JTC 1/SC 17 ISO/IEC JTC 1/SC 27 ISO/IEC JTC 1/SC 31 ISO/IEC JTC 1/SC 35 ISO/IEC JTC 1/SC 38 ISO/IEC...

defined in ISO 10383 by the International Organization for Standardization (ISO). For example, the US NASDAQ market is identified by MIC XNAS. ISO 10383 is...

ISO 5427 is an 8-bit extension to the KOI-7 N1 character set, which was standardised by the ISO. The first half was published in 1979, and the second...

This is a list of ISO 639-3 language codes starting with A. Index | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u...

SQL:2023 or ISO/IEC 9075:2023 (under the general title "Information technology – Database languages – SQL") is the ninth edition of the ISO (1987) and...

ISO 3166-2:AR is the entry for Argentina in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO/IEC 27005 "Information technology — Security techniques — Information security risk management" is an international standard published by the International...

ORCID "ISO Online Browsing Platform". www.iso.org. Retrieved 2025-04-26. "ISO/IEC 7064:2003". ISO. Retrieved 2025-04-26. "ISO 7064:1983". ISO. Retrieved...

ISO/TC 279 is a technical committee of the International Organization for Standardization (ISO). Its purpose is to develop, maintain and promote standards...

Iso H (real name: Carl Henrik Rosenberg), born 11 January 1979 in Helsinki, is a Finnish rapper. Together with his colleague Elastinen, he formed the...

ISO/IEC 10967, Language independent arithmetic (LIA), is a series of standards on computer arithmetic. It is compatible with IEEE 754 (also published...

The ISO 22715 standard Cosmetics — Packaging and labelling provides guidelines for manufacturers in the best practices for cosmetic packaging and labelling...

ISO/IEC 14651:2016, Information technology -- International string ordering and comparison -- Method for comparing character strings and description of...

Creation and delegation of ccTLDs is described in RFC 1591, corresponding to ISO 3166-1 alpha-2 country codes. While gTLDs have to obey international regulations...

Diagrams, showing dimensions of tubing and fittings ISO 7-1:1994 ISO 7-2:2000 ISO 228-1:2000 ISO 228-2:1987 Parallel pipe threads G Parallel pipe threads...

ISO/IEC 20248 Automatic Identification and Data Capture Techniques – Data Structures – Digital Signature Meta Structure is an international standard specification...

ISO/IEC 38500 is an international standard for Corporate governance of information technology published jointly by the International Organization for...

Iso-Heikkilä (Finnish; Storheikkilä in Swedish) is a district of the city of Turku, in Finland. It is located to the west of the city centre, bordering...

ISO 3166-2:DK is the entry for Denmark in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

accordance with ISO 8178". Iso.org. 30 September 2007. Retrieved 18 July 2011. "ISO 1585:1992 - Road vehicles - Engine test code - Net power". Iso.org. 15 November...

invented by Dr. Ynjiun P. Wang at Symbol Technologies in 1991. It is defined in ISO 15438. The PDF417 bar code (also called a symbol) consists of 3 to 90 rows...

ISO 20252:2019 is an international standard for a quality management system for organizations conducting market, opinion and social research. Developed...

ISO/TC 184/SC 4 is an international standards organization responsible for industrial data. ISO/TC 184/SC 4 develops and maintains ISO standards that describe...

specifications have been based on TIFF 6.0, including TIFF/EP (ISO 12234-2), TIFF/IT (ISO 12639), TIFF-F (RFC 2306) and TIFF-FX (RFC 3949). TIFF was created...

ISO/IEC 9126 Software engineering — Product quality was an international standard for the evaluation of software quality. It has been replaced by ISO/IEC...

ISO 25500: Supply chain interoperability and integration — Part 1: Overview and principles of the Industrial Internet is a Draft International Standard...

In baseball, isolated power or ISO is a sabermetric computation used to measure a batter's raw power. One formula is slugging percentage minus batting...

ISO/IEC JTC 1/SC 6 Telecommunications and information exchange between systems is a standardization subcommittee of the Joint Technical Committee ISO/IEC...

pension fund. The ISO 55000 series of standards, developed by ISO TC 251, is the international standards for asset management. ISO 55000 provides an introduction...

Italian-designed microcar initially manufactured in 1953 by the Italian firm Iso SpA, and subsequently built under license in a number of different countries...

Iso Roobertinkatu (Swedish: Stora Robertsgatan), meaning "great Robert street", is a street running northeast-southwest in the Punavuori district in Helsinki...

published as a series of documents (ISO 5127-1:1983, ISO 5127-2:1983, ISO 5127-3:1988, ISO 5127-3a:1981, ISO 5127-6:1983, ISO 5127-11:1987). The revision of...

reference model developed by the International Organization for Standardization (ISO) that "provides a common basis for the coordination of standards development...

PDF/A is an ISO-standardized version of the Portable Document Format (PDF) specialized for use in the archiving and long-term preservation of electronic...

Identifier system. "ISO 20275:2017". ISO. "ISO - Maintenance agencies and registration authorities". ISO. ISO catalogue page for ISO 20275:2017 v t e...

ISO 3166-2:MA is the entry for Morocco in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

levels 2 and 3 of ISO/IEC 4873 (as opposed to ISO/IEC 8859, which defines character encodings at level 1 of ISO/IEC 4873). The parts of ISO/IEC 8859 define...

Definition Schemas ISO/IEC 9075-12 - SQL Replication ISO/IEC 9075-13 - SQL/JRT ISO/IEC 9075-14 - SQL/XML ISO/IEC 9075-15 - SQL/MDA ISO/IEC 9075-16 - SQL/PGQ...

ISO 10303-22 is a part of the implementation methods of STEP with the official title Standard data access interface or simply SDAI. SDAI defines an abstract...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

The International Standard ISO 6385 "Ergonomic principles in the design of work systems" is published by the International Organization for Standardization...

known as ISO/IEC Guide 25, ISO/IEC 17025 was initially issued by ISO/IEC in 1999. There are many commonalities with the ISO 9000 standard, but ISO/IEC 17025...

ISO/IEC 18014 Information technology — Security techniques — Time-stamping services is an international standard that specifies time-stamping techniques...

encryption in ISO base media file format files (ISO/IEC 23001-7:2016) for MPEG-TS, Common encryption of MPEG-2 transport streams (ISO/IEC 23001-9:2016)...

ISO/IEC/IEEE 42010 Systems and software engineering — Architecture description is an international standard for architecture descriptions of systems and...

measurements are to each other. The International Organization for Standardization (ISO) defines a related measure: trueness, "the closeness of agreement between...

ISO 3166-2:TW is the entry for Taiwan, "Taiwan, Province of China", or "Taiwan (Province of China)", in ISO 3166-2, part of the ISO 3166 standard published...

The ISO 10993 set entails a series of standards for evaluating the biocompatibility of medical devices to manage biological risk. These documents were...

MPEG-4 Part 3 or MPEG-4 Audio (formally ISO/IEC 14496-3) is the third part of the ISO/IEC MPEG-4 international standard developed by Moving Picture Experts...

ISO/IEC 8859-6:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 6: Latin/Arabic alphabet, is part of the ISO/IEC 8859...

Organization for Standardization as ISO 14230. One underlying physical layer used for KWP2000 is identical to ISO 9141, with bidirectional serial communication...

been developed. The term country code frequently refers to ISO 3166-1 alpha-2 (a part of the ISO 3166 standard), as well as the telephone country code, which...

ISO/IEC JTC 1/SC 38 Cloud Computing and Distributed Platforms is a standardization subcommittee, which is part of the Joint Technical Committee ISO/IEC...

ISO 3166-2:PH is the entry for the Philippines in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

Gulledge, September 10, 1989), better known by his stage name King Iso (formerly ISO and Reali-T), is an American rapper from Omaha, Nebraska. He is currently...

ISO/IEC 8859-11:2001, Information technology — 8-bit single-byte coded graphic character sets — Part 11: Latin/Thai alphabet, is part of the ISO/IEC 8859...

The ISO 3533 standard defines the safety requirements for sex toys. The standard stems from efforts from the Swedish standards agency SIS to introduce...

functions. ISO/IEC 33001:2015 is a revision of ISO/IEC 15504, also termed Software Process Improvement and Capability Determination (SPICE). The ISO/IEC 330xx...

ISO. "Freely Available Standards". ISO. "ISO 22301:2019". ISO. 5 June 2023. "ISO 22313:2020". ISO. "ISO 22315:2014". ISO. "ISO/TS 22317:2015". ISO. "ISO/TS...

Shoes" (based on ISO 2816:1973) and GOST 11373-88 "Shoe Sizes" (based on ISO 3355:1975), and lately by GOST R 58149-2018 (based on ISO 9407:1991) Standard...

retrospectively made into an ISO standard, ISO 15022. In many instances, SWIFT message types between custodians follow the ISO standard. This was later supplemented...

KOI8-F). The name "ISO-IR-111" refers to its registration number in the ISO-IR registry, and denotes it as a set usable with ISO/IEC 2022. It was defined...

ISO 3166-2:PT is the entry for Portugal in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO New England Inc. (ISO-NE) is an independent, non-profit regional transmission organization (RTO), headquartered in Holyoke, Massachusetts, serving...

Streaming text format is the text-based subtitle format for MPEG-4, published as ISO/IEC 14496-17 in 2006. It was developed in response to the need for a generic...

Iso is an Indo-Pacific genus of silversides, commonly called surf sardines, the only genus in the monogeneric family Isonidae, they were formerly classified...

in 1997. Before 1989, the ISO 3166 alpha-2 code for Burma was BU, but no .bu ccTLD was assigned. On 12 June 2011, the ISO 3166-1 code for Myanmar changed...

ISO/IEC JTC 1/SC 35 User interfaces is a standardization subcommittee (SC), which is part of the joint technical committee, ISO/IEC JTC 1, of the International...

named ITU-T Rec. X.901-X.904 and ISO/IEC 10746, is a joint effort by the International Organization for Standardization (ISO), the International Electrotechnical...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

Iso-Polyphony (Albanian: Iso-polifonia) is a traditional form of Albanian folk music in which multi-line singing is accompanied by choral drone parts,...

ISO-IR-182 is a Welsh variant of ISO/IEC 8859-1 that supports the Welsh language. However, it lacks the letters used in the Irish language (which are in...

ISO 37120 Sustainable development of communities -- Indicators for city services and quality of life establishes and defines the methodologies for a set...

Ariko Iso (磯 有理子, Iso Ariko) (born December 7, 1970, in Tokyo, Japan) is the associate athletic trainer for football for the University of Colorado Buffaloes...

Xal or XAL may refer to: xal, the ISO 639-3 language code for the Oirat language xal, the ISO 639 code for Kalmyk Oirat Xal, a traditional Kurdish tattoo...

ISO/IEC 24727-1:2014 Part 1: Architecture ISO/IEC 24727-2:2008 Part 2: Generic card interface ISO/IEC 24727-3:2008 Part 3: Application interface ISO/IEC...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

International Standard ISO/IEC 81346 series "Industrial systems, installations and equipment and industrial products – structuring principles and reference...

reference numbers (second column) are specified in ISO 4063 (in the European Union published as EN ISO 4063). Numbers in parentheses are obsolete and were...

ISO 20471 is an International Organization for Standardization technical standard describing requirements for high-visibility clothing, along with methods...

data link layers such as CAN (ISO 11898), LIN (ISO 17987), Ethernet (ISO 13400), FlexRay (ISO 17458), and K-Line (ISO 14230). In practice, UDS is most...

ISO 3166-2:FI is the entry for Finland in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

2020-09-03. "ISO 22315:2014". ISO. "ISO 22319:2017". ISO. 30 October 2020. "ISO 22395:2018". ISO. 30 October 2020. "ISO 22396:2020". ISO. ISO 22392— Security...

ISO/IEC 7810 Identification cards — Physical characteristics is an international standard that defines the physical characteristics for identification...

ISO 3166-2:AE is the entry for the United Arab Emirates in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

adopted as a standard by the ANSI in 1986 as SQL-86 and the ISO in 1987. It is maintained by ISO/IEC JTC 1, Information technology, Subcommittee SC 32, Data...

the ISO 41000 series, such as ISO 41001 (a management system standard for facility management) and ISO 41011 (which defines key terminology). ISO 41001:2018...

resource management – Lexical markup framework (LMF; ISO 24613), produced by ISO/TC 37, is the ISO standard for natural language processing (NLP) and machine-readable...

(ISO) and the International Electrotechnical Commission (IEC) under the joint ISO and IEC subcommittee, ISO/IEC JTC 1/SC 27. It is part of the ISO/IEC...

ISO 3166-2:SE is the entry for Sweden in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

the Moving Pictures Expert Group (MPEG) and is an international standard (ISO/IEC 13818, titled Information technology — Generic coding of moving pictures...

Iso Camartin (born 24 March 1944 in Chur)[citation needed] is a Swiss author, publicist and anchorman. Kants Schematismuslehre und ihre Transformation...

ISO 3166-2:AZ is the entry for Azerbaijan in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO 3166-2:BA is the entry for Bosnia and Herzegovina in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO 3166-2:CN is the entry for China in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

Iso Lohijärvi is a medium-sized lake in the Tornionjoki main catchment area. It is located in Ylitornio municipality, in the Lapland region in Finland...

ISO 3166-2:PL is the entry for Poland in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO/IEC 19794 Information technology—Biometric data interchange formats—Part 5: Face image data, or ISO/IEC 19794-5 for short, is the fifth of 8 parts...

shaken) ISO/IEC JTC 1/SC 28 ISO/IEC 19752:2004 at www.iso.org ISO/IEC 19752:2017 "ISO/IEC 19752:2017". www.iso.org. Retrieved 2022-07-21. ISO Standard...

ISO 843 is a system for the transliteration and/or transcription of Greek characters into Latin characters. It was released by the International Organization...

YUO may refer to: ISO code for Yubanakor dialect of Kwanga language ISO 4217 currency code for Yugoslav dinar in 1993 You (disambiguation) This disambiguation...

ISO 3166-2:GR is the entry for Greece in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

the course for ISO standards development and strategy: participates and votes in ISO technical and policy meetings; sells and adopts ISO standards nationally...

Iso Lamujärvi is a medium-sized lake in the Siikajoki main catchment area. It is located in the region Northern Ostrobothnia in Finland. There are eight...

independent system operator (ISO) is similarly an organization formed at the recommendation of FERC. In the areas where an ISO is established, it coordinates...

ISO/IEC 5230 (known as OpenChain) is an international standard on the key requirements for a high-quality open source license compliance program. The...

ISO 14051 is part of the ISO 14000 family of standards relating to environmental management codified by the International Organization for Standardization...

ISO/IEC 15897 (Procedures for the registration of cultural elements) is an ISO/IEC standard for the registration of new POSIX locales and POSIX charmaps...

ISO 16610: Geometrical product specifications (GPS) – Filtration is a standard series on filters for surface texture, and provides guidance on the use...

ISO/IEC JTC 1/SC 42 Artificial Intelligence is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization...

language. In 1989, ISO 7185 was revised (ISO 7185:1990) to correct various errors and ambiguities found in the original document. The ISO 7185 was stated...

ISO 3166-2:EG is the entry for Egypt in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 3166-2:BG is the entry for Bulgaria in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

This is a list of ISO technical committees. International Organization for Standardization (ISO) is a standards-making body, similar to the International...

standard ISO/IEC/IEEE 60559:2011 (with content identical to IEEE 754-2008) has been approved for adoption through ISO/IEC JTC 1/SC 25 under the ISO/IEEE PSDO...

ISO 3166-2:PE is the entry for Peru in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 3166-1 numeric (or numeric-3) codes are three-digit country codes defined in ISO 3166-1, part of the ISO 3166 standard published by the International...

ISO 3166-2:TH is the entry for Thailand in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

According to the American Astronomical Society (AAS), products meeting the ISO 12312-2 standard are safe for direct solar viewing. The AAS maintains web...

Code page 1104 (CCSID 1104), also known as CP1104, F7DEC, ISO-IR-025 or NF Z 62-010 (1973) is an IBM code page number assigned to the French variant of...

is the standard library for the C programming language specified in the ISO C standard. Starting from the original ANSI C standard, it was developed...

sovereign states and self-governing dependent territories based upon the ISO standard ISO 3166-1. 470 m (1,542 ft) according to other sources 920 m (3,018 ft)...

protocol specification in International Organization for Standardization (ISO) Open Systems Interconnection model (OSI) standards. LOTOS is an algebraic...

ISO 3166-2:RO is the entry for Romania in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

February 2021. "ISO 9000-3:1997". ISO. "ISO/IEC 90003:2014". ISO. ISO/IEC 90003—Software engineering -- Guidelines for the application of ISO 9001 to computer...

ISO/IEC 8859-7:2003, Information technology — 8-bit single-byte coded graphic character sets — Part 7: Latin/Greek alphabet, is part of the ISO/IEC 8859...

ISO 3166-2:CS was the entry for Serbia and Montenegro in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO/IEC 7811 Identification cards — Recording technique is a set of nine (7811-1 to 7811-9) standards describing the recording technique on identification...

UCSSS. Isofix is International Organization for Standardization (ISO) standard ISO 13216, which specifies the anchoring system for Group 1 child safety...

"ISO 22320:2018". ISO. 12 July 2019. "ISO 22322:2015". ISO. 13 November 2015. "ISO 22325:2016". ISO. "ISO 22326:2018". ISO. "ISO 22327:2018". ISO. "ISO/TR...

Iso-Naakkima is a lake in Southern Savonia, Finland, about 10 km south of the town of Pieksämäki. It is notable for having an eroded impact crater under...

ISO/IEC JTC 1/SC 32 Data management and interchange is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International...

Iso Sluijters (born 24 July 1990) is a Dutch handball player for GC Amicitia Zürich and the Dutch national team. He represented the Netherlands at the...

ISO/IEC 21838 is a multi-part standard published by the International Organization for Standardization (ISO) and the International Electrotechnical Commission...

ISO 3166-2:CD is the entry for the Democratic Republic of the Congo in ISO 3166-2, part of the ISO 3166 standard published by the International Organization...

accurate measurements. ISO 8653:2016 defines standard ring sizes in terms of the inner circumference of the ring measured in millimetres. ISO sizes are used in...

which entities review the quality of all factors involved in production. ISO 9000 defines quality control as "a part of quality management focused on...

connections—typically, TCP/IP. It is an open OASIS standard and an ISO recommendation (ISO/IEC 20922). Andy Stanford-Clark (IBM) and Arlen Nipper (then working...

ISO 3166-2:HU is the entry for Hungary in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

languages, see ISO 639-1 (list of ISO 639 language codes for 136 major languages), or for a more inclusive list, see ISO 639-3 (list of ISO 639-3 codes,...

ISO 3166-2:HR is the entry for Croatia in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

"extended ASCII", and the use of the term has been criticized. The ISO standard ISO 8859 was the first international standard to formalise an expansion...

ISO 3166-2:GE is the entry for Georgia in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

A number of ISO standards cover trailer connectors, the electrical connectors between vehicles and the trailers they tow that provide a means of control...

ISO/IEC JTC 1/SC 2 Coded character sets is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization...

standards are the ISO/IEC standards OpenDocument (ISO 26300:2006) and the Strict and Transitional versions of Office Open XML (ISO 29500:2008). Another...

ISO/IEC 27003 Information technology — Security techniques — Information security management systems — Guidance. It is part of a family of standards of...

consortium disbanded in 2009, but the FlexRay standard is now a set of ISO standards, ISO 17458-1 to 17458-5. FlexRay is a communication bus designed to ensure...

Egy may be: the ISO 639 code for the Egyptian language an abbreviation of Egypt Eggy (disambiguation) Egi (disambiguation) Quartetto Egie This disambiguation...

languages such as Ware below.) SIL codes are upper case; ISO codes are lower case. Once retired, ISO 639-3 codes are not reused. SIL codes that were retired...

ISO 3166-2:BY is the entry for Belarus in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 2921 is a specification created by the International Organization for Standardization for a method in determining the temperature-retraction characteristics...

The ISO Recorder Power Toy is a shell extension that uses native Windows XP functions to add a new CD recording option to Windows XP's context menus,...

ISO/IEC 27018 Information technology — Security techniques — Code of practice for protection of personally identifiable information (PII) in public clouds...

other parameters. Besides this ISO 2859-2 Sampling plans indexed by limiting quality (LQ) for isolated lot inspection and ISO 2859-3 Sampling procedures for...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

ISO 3166-2:KP is the entry for North Korea (officially the Democratic People's Republic of Korea) in ISO 3166-2, part of the ISO 3166 standard published...

ISO 3166-2:EC is the entry for Ecuador in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 3166-2:MK is the entry for North Macedonia in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

isoHunt was an online torrent files index and repository, where visitors could browse, search, download or upload torrents of various digital content...