Super Proton Synchrotron

CERN Complex
Current particle and nuclear facilities
LHC	Accelerates protons and heavy ions
LEIR	Accelerates ions
SPS	Accelerates protons and ions
PSB	Accelerates protons
PS	Accelerates protons or ions
Linac 3	Injects heavy ions into LEIR
Linac4	Accelerates ions
AD	Decelerates antiprotons
ELENA	Decelerates antiprotons
ISOLDE	Produces radioactive ion beams
MEDICIS	Produces isotopes for medical purposes

Super Proton Synchrotron
	Test beamline delivered from the SPS. In photo 20 GeV positrons are used to calibrate the Alpha Magnetic Spectrometer.
General properties
Accelerator type	Synchrotron
Beam type	protons, heavy ions
Target type	Injector for LHC, fixed target
Beam properties
Maximum energy	450 GeV
Physical properties
Circumference	6.9 kilometres (4.3 mi)
Coordinates	46°14′06″N 6°02′33″E / 46.23500°N 6.04250°E
Institution	CERN
Dates of operation	1976–present
Preceded by	SppS

The Super Proton Synchrotron (SPS) is a particle accelerator of the synchrotron type at CERN. It is housed in a circular tunnel, 6.9 kilometres (4.3 mi) in circumference,^[1] straddling the border of France and Switzerland near Geneva, Switzerland.^[2]

History

The SPS was designed by a team led by John Adams, director-general of what was then known as Laboratory II. Originally specified as a 300 GeV accelerator, the SPS was actually built to be capable of 400 GeV, an operating energy it achieved on the official commissioning date of 17 June 1976. However, by that time, this energy had been exceeded by Fermilab, which reached an energy of 500 GeV on 14 May of that year.^[3]

The SPS has been used to accelerate protons and antiprotons, electrons and positrons (for use as the injector for the Large Electron–Positron Collider (LEP)^[4]), and heavy ions.

From 1981 to 1991, the SPS operated as a hadron (more precisely, proton–antiproton) collider (as such it was called SppS), when its beams provided the data for the UA1 and UA2 experiments, which resulted in the discovery of the W and Z bosons. These discoveries and a new technique for cooling particles led to a Nobel Prize for Carlo Rubbia and Simon van der Meer in 1984.

From 2006 to 2012, the SPS was used by the CNGS experiment to produce a neutrino beam to be detected at the Gran Sasso laboratory in Italy, 730 km from CERN.

Current operations

The SPS is now used as the final injector for high-intensity proton beams for the Large Hadron Collider (LHC), which began preliminary operation on 10 September 2008, for which it accelerates protons from 26 GeV to 450 GeV. The LHC itself then accelerates them to several teraelectronvolts (TeV).

Operation as injector still allows continuation of the ongoing fixed-target research program, where the SPS is used to provide 400 GeV proton beams for a number of active fixed-target experiments, notably COMPASS, NA61/SHINE and NA62.

The SPS has served, and continues to be used as a test bench for new concepts in accelerator physics. In 1999 it served as an observatory for the electron cloud phenomenon.^[5] In 2003, SPS was the first machine where the Hamiltonian resonance driving terms were directly measured.^[6] And in 2004, experiments to cancel the detrimental effects of beam encounters (like those in the LHC) were carried out.^[7]

The SPS RF cavities operate at a center frequency of 200.2 MHz.

Major discoveries

Major scientific discoveries made by experiments that operated at the SPS include the following.

1983: The discovery of W and Z bosons in the UA1 and UA2 experiments.^[8] The 1984 Nobel Prize in physics was awarded to Carlo Rubbia and Simon van der Meer for the developments that led to this discovery.
1999: The discovery of direct CP violation by the NA48 experiment.^[9]

Upgrade for high luminosity LHC

The Large Hadron Collider will require an upgrade to considerably increase its luminosity during the 2020s. This would require upgrades to the entire linac/pre-injector/injector chain, including the SPS.

As part of this, the SPS will need to be able to handle a much higher intensity beam. One improvement considered in the past was increasing the extraction energy to 1 TeV.^[10] However, the extraction energy will be kept at 450 GeV while other systems are upgraded. The acceleration system will be modified to handle the higher voltages needed to accelerate a higher intensity beam. The beam dumping system will also be upgraded so it can accept a higher intensity beam without sustaining significant damage.^[11]

Notes and references

^ "SPS Presentation at AB-OP-SPS Home Page". Archived from the original on 5 October 2011. Retrieved 15 September 2008.
^ Information on CERN Sites Archived 8 July 2012 at archive.today. CERN. Updated 26 January 2010.
^ CERN courier
^ The LEP Collider – from Design to Approval and Commissioning Archived 18 June 2014 at the Wayback Machine, by S. Myers, section 3.8. Last accessed 28 February 2010.
^ "observation of e-cloud" (PDF). Archived from the original (PDF) on 29 September 2011. Retrieved 20 July 2006.
^ Measurement of resonance driving terms Archived 16 July 2011 at the Wayback Machine
^ "wire compensation" (PDF). Archived from the original (PDF) on 29 September 2011. Retrieved 24 July 2006.
^ "CERN.ch La". Public.web.cern.ch. Retrieved 20 November 2010.
^ Fanti, V.; et al. (1999). "A new measurement of direct CP violation in two pion decays of the neutral kaon". Physics Letters B. 465 (1–4): 335–348. arXiv:hep-ex/9909022. Bibcode:1999PhLB..465..335F. doi:10.1016/S0370-2693(99)01030-8. S2CID 15277360.
^ Super-SPS
^ Hanke, Klaus; Damerau, Heiko; Deleu, Axelle; Funken, Anne; Garoby, Roland; Gilardoni, Simone; Gilbert, Nicolas; Goddard, Brennan; Holzer, Eva Barbara; Lombardi, Alessandra; Manglunki, Django; Meddahi, Malika; Mikulec, Bettina; Shaposhnikova, Elena; Vretenar, Maurizio (2014). "Status of the LIU Project at CERN". Proceedings of the 5th Int. Particle Accelerator Conf. IPAC2014. Petit-Jean-Genaz Christine (Ed.), Arduini Gianluigi (Ed.), Michel Peter (Ed.), Schaa, Volker RW (Ed.): 3 pages, 0.320 MB. doi:10.18429/JACOW-IPAC2014-THPME070.