Thin small outline package
Thin small outline package (TSOP) is a type of surface mount IC package. They are very low-profile (about 1mm) and have tight lead spacing (as low as 0.5mm). They are frequently used for RAM or Flash memory ICs due to their high pin count and small volume. In some applications, they are being supplanted by ball grid array packages which can achieve even higher densities. The prime application for this technology is memory. SRAM, flash memory, FSRAM and E2PROM manufacturers find this package well suited to their end-use products. It answers the needs required by telecom, cellular, memory modules, PC cards (PCMCIA cards), wireless, netbooks and countless other product applications. TSOP is the smallest leaded form factor for flash memory.[1]
HistoryThe TSOP package was developed to fit the reduced package height available in a PCMCIA PC Card.[2] Physical propertiesTSOPs are rectangular in shape and come in two varieties: Type I and Type II. Type I ICs have the pins on the shorter side and Type II have the pins on the longer side. The table below shows basic measurements for common TSOP packages. [3] Type I
Type II
HTSOPHTSOP (Heatsink TSOP) is a variant of TSOP with an exposed pad on the bottom side.[citation needed] The pad is soldered to the PCB to transfer heat from the package to the PCB. Similar packagesThere are a variety of small form-factor IC carrier available other than TSOPs
See also
References
External linksWikimedia Commons has media related to TSOP integrated circuit packages. |