South African type YE1 tender

Specifications
Specifications
Configuration	3-axle
Gauge	3 ft 6 in (1,067 mm) Cape gauge
Length	21 ft 4+3⁄8 in (6,512 mm)
Wheel dia.	37 in (940 mm)
Wheelbase	10 ft 6 in (3,200 mm)
Axle load	11 LT 6 cwt 3 qtr (11,520 kg) av.
Weight empty	34,470 lb (15,640 kg)
Weight w/o	34 LT (34,550 kg)
Fuel type	Coal
Fuel cap.	6 LT (6.1 t)
Water cap.	2,825 imp gal (12,800 L)
Stoking	Manual
Couplers	Drawbar & Johnston link-and-pin

Type and origin
Type and origin
Locomotive	CGR Karoo Class of 1904
Designer	Hazlitt Beatty
Builder	Beyer, Peacock & Company
In service	1904

South African type YE1 tender
	Type YE1 tender on CGR Karoo Class of 1904
Locomotive
Type and origin
Locomotive	CGR Karoo Class of 1904
Designer	Hazlitt Beatty
Builder	Beyer, Peacock & Company
In service	1904
Configuration
Specifications
Configuration	3-axle
Gauge	3 ft 6 in (1,067 mm) Cape gauge
Length	21 ft 4+3⁄8 in (6,512 mm)
Wheel dia.	37 in (940 mm)
Wheelbase	10 ft 6 in (3,200 mm)
Axle load	11 LT 6 cwt 3 qtr (11,520 kg) av.
Weight empty	34,470 lb (15,640 kg)
Weight w/o	34 LT (34,550 kg)
Fuel type	Coal
Fuel cap.	6 LT (6.1 t)
Water cap.	2,825 imp gal (12,800 L)
Stoking	Manual
Couplers	Drawbar & Johnston link-and-pin
Operators
Career
Operators	Cape Government Railways; South African Railways
Numbers	SAR 723-726

The South African type YE1 tender was a steam locomotive tender from the pre-Union era in the Cape of Good Hope.

The Type YE1 tender entered service in 1904, as tenders to the second batch of four Karoo Class 4-6-2 Pacific type steam locomotives of the Cape Government Railways, which would be designated Class 5B on the South African Railways in 1912.^[1]^[2]^[3]

Manufacturer

Type YE1 tenders were built by Beyer, Peacock & Company in 1904.^[1]

The Cape Government Railways (CGR) placed four more Karoo Class steam locomotives with a 4-6-2 Pacific type wheel arrangement in service in 1904. The original Karoo Class locomotive and tender had been designed at the Salt River works in Cape Town by Chief Locomotive Superintendent Hazlitt Beatty in 1903. This second batch of locomotives was built to a slightly modified design and would be designated Class 5B on the South African Railways (SAR) in 1912. The Type YE1 entered service as tenders to these four engines.^[1]^[2]^[3]

Characteristics

The Type YE1 tender had a coal capacity of 6 long tons (6.1 tonnes), a water capacity of 2,825 imperial gallons (12,800 litres) and an average maximum axle loading of 11 long tons 6 hundredweight 3 quarters (11,520 kilograms). The tender had the same dimensions and water capacity as the Type YE tender, but a 10 long hundredweight (0.5 tonnes) bigger coal capacity and a 6 inches (152 millimetres) longer wheelbase.^[2]^[3]

Locomotive

In the SAR years, tenders were numbered for the engines they were delivered with. In most cases, an oval number plate, bearing the engine number and often also the tender type, would be attached to the rear end of the tender. During the classification and renumbering of locomotives onto the SAR roster in 1912, no separate classification and renumbering list was published for tenders, which should have been renumbered according to the locomotive renumbering list.^[4]

Only Class 5B locomotives were delivered new with Type YE1 tenders. Bearing in mind that tenders could and did migrate between engines, they should have been numbered in the SAR number range from 723 to 726.^[3]^[4]

Classification letters

Since many tender types are interchangeable between different locomotive classes and types, a tender classification system was adopted by the SAR. The first letter of the tender type indicates the classes of engines to which it could be coupled. The "Y_" tenders could be used with the locomotive classes as shown.^[3]

The second letter indicates the tender's water capacity. The "_E" tenders had a capacity of between 2,800 and 2,855 imperial gallons (12,700 and 13,000 litres; 3,360 and 3,430 US gallons).^[3]

A number, when added after the letter code, indicates differences between similar tender types, such as function, wheelbase or coal bunker capacity.^[3]

Modification

The original slatted upper sides of the Type YE1 tender's coal bunker were soon extended higher or replaced by sheet-metal sides.

Illustration

Modified Type YE1 on SAR Class 5B, c. 1930

References

^ ^a ^b ^c Holland, D.F. (1971). Steam Locomotives of the South African Railways. Vol. 1: 1859–1910 (1st ed.). Newton Abbott, England: David & Charles. pp. 71–72. ISBN 978-0-7153-5382-0.
^ ^a ^b ^c South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 41.
^ ^a ^b ^c ^d ^e ^f ^g South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 6a-7a, 41.
^ ^a ^b Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer’s Office, Pretoria, January 1912, pp. 8, 12, 14, 34 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)