Dichlorodifluoromethane (R-12) is a colorless gas usually sold under the brand nameFreon-12, and a chlorofluorocarbonhalomethane (CFC) used as a refrigerant and aerosol spray propellant. In compliance with the Montreal Protocol, its manufacture was banned in developed countries (non-article 5 countries) in 1996, and in developing countries (Article 5 countries) in 2010 out of concerns about its damaging effect on the ozone layer.[5] Its only allowed usage is as a fire retardant in submarines and aircraft. It is soluble in many organicsolvents. R-12 cylinders are colored white.
The use of chlorofluorocarbons as aerosols in medicine, such as USP-approved salbutamol, has been phased out by the U.S. Food and Drug Administration. A different propellant known as hydrofluoroalkane, or HFA, which was not known to harm the environment, was chosen to replace it.[8]
Retrofitting
R-12 was used in most refrigeration and vehicle air conditioning applications prior to 1994 before being replaced by 1,1,1,2-tetrafluoroethane (R-134a), which has an insignificant ozone depletion potential. Automobile manufacturers started using R-134a instead of R-12 in 1992–1994. When older units leak or require repair involving removal of the refrigerant, retrofitment to a refrigerant other than R-12 (most commonly R-134a) is required in some jurisdictions. The United States does not require automobile owners to retrofit their systems; however, taxes on ozone-depleting chemicals coupled with the relative scarcity of the original refrigerants on the open market make retrofitting the only economical option. Retrofitment requires a system flush and a new filter/dryer or accumulator, and may also involve the installation of new seals and/or hoses made of materials compatible with the refrigerant being installed. Mineral oil used with R-12 is not compatible with R-134a. Some oils designed for conversion to R-134a are advertised as compatible with residual R-12 mineral oil. Another replacement for R-12 is the highly flammable, but truly drop-in HC-12a, whose flammability has led to injuries and deaths in a bus fire in 2006.[9][10]
Dangers
Aside from its environmental impacts, R12, like most chlorofluoroalkanes, forms phosgene gas when exposed to a naked flame.[11]
Properties
Table of thermal and physical properties of saturated liquid refrigerant 12:[12][13]
Temperature (°C)
Density (kg/m^3)
Specific heat (kJ/kg K)
Kinematic viscosity (m^2/s)
Conductivity (W/m K)
Thermal diffusivity (m^2/s)
Prandtl Number
Bulk modulus (K^-1)
-50
1546.75
0.875
3.10E-07
0.067
5.01E-01
6.2
2.63E-03
-40
1518.71
0.8847
2.79E-07
0.069
5.14E-01
5.4
-
-30
1489.56
0.8956
2.53E-07
0.069
5.26E-01
4.8
-
-20
1460.57
0.9073
2.35E-07
0.071
5.39E-01
4.4
-
-10
1429.49
0.9203
2.21E-07
0.073
5.50E-01
4
-
0
1397.45
0.9345
2.14E-07
0.073
5.57E-01
3.8
-
10
1364.3
0.9496
2.03E-07
0.073
5.60E-01
3.6
-
20
1330.18
0.9659
1.98E-07
0.073
5.60E-01
3.5
-
30
1295.1
0.9835
1.94E-07
0.071
5.60E-01
3.5
-
40
1257.13
1.0019
1.91E-07
0.069
5.55E-01
3.5
-
50
1215.96
1.0216
1.90E-07
0.067
5.45E-01
3.5
-
Gallery
CFC-12 measured by the Advanced Global Atmospheric Gases Experiment (AGAGE) in the lower atmosphere (troposphere) at stations around the world. Abundances are given as pollution free monthly mean mole fractions in parts-per-trillion.
Hemispheric and global mean CFC-12 concentrations (NOAA/ESRL)
Time-series of atmospheric concentrations of CFC-12 (Walker et al., 2000)
1990s sea surface CFC-12 concentration
1990s CFC-12 oceanic vertical inventory
CFC-12, CFC-11, H-1211 and SF6 vertical profiles
References
^Touloukian, Y. S., Liley, P. E., and Saxena, S. C. Thermophysical properties of matter – the TPRC data series. Volume 3. Thermal conductivity – nonmetallic liquids and gases. Data book. 1970.
^Khristenko, Sergei V.; Maslov, Alexander I. and Viatcheslav P. Shevelko; Molecules and Their Spectroscopic Properties, p. 74 ISBN3642719481.
^"1:Update on Ozone-Depleting Substances (ODSs) and Other Gases of Interest to the Montreal Protocol". Scientific assessment of ozone depletion: 2018(PDF) (Global Ozone Research and Monitoring Project–Report No. 58 ed.). Geneva, Switzerland: World Meteorological Organization. 2018. p. 1.10. ISBN978-1-7329317-1-8. Retrieved 22 November 2020.
^Plunkett, Roy J. (1986). High Performance Polymers: Their Origin and Development. Elsevier Science Publishing Co., Inc. pp. 261–262. ISBN978-94-011-7073-4.
^Holman, Jack P. (2002). Heat Transfer (9th ed.). New York, NY: McGraw-Hill Companies, Inc. pp. 600–606. ISBN9780072406559.
^Incropera 1 Dewitt 2 Bergman 3 Lavigne 4, Frank P. 1 David P. 2 Theodore L. 3 Adrienne S. 4 (2007). Fundamentals of Heat and Mass Transfer (6th ed.). Hoboken, NJ: John Wiley and Sons, Inc. pp. 941–950. ISBN9780471457282.{{cite book}}: CS1 maint: numeric names: authors list (link)